PassLeader just published the NEWEST Fortinet NSE8_812 exam dumps! And, PassLeader offer two types of the NSE8_812 dumps — NSE8_812 VCE dumps and NSE8_812 PDF dumps, both VCE and PDF contain the NEWEST NSE8_812 exam questions, they will help you PASSING the Fortinet NSE8_812 exam easily! Now, get the NEWEST NSE8_812 dumps in VCE and PDF from PassLeader — https://www.passleader.com/nse8-812.html (109 Q&As Dumps –> 198 Q&As Dumps)
What’s more, part of that PassLeader NSE8_812 dumps now are free — https://drive.google.com/drive/folders/1cDWnIf_DJEFgVEbiodH_-L_uXDSQ73sa
NEW QUESTION 81
You notice that memory usage is high and FortiGate has entered conserve mode. You want FortiGate’s IPS engine to focus only on exploits and attacks that are applicable to your specific network. Which two steps would you take to reduce RAM usage without weakening security? (Choose two.)
A. Configure IPS to pass files that are larger than a specific threshold, instead of buffering and scanning them.
B. Reduce the size of the signature three (filters) that FortiGate must search by disabling scans for applications and OS stacks that do not exist on your network.
C. Disable application control for protocols that are not used on your network.
D. Disable IPS for traffic destined for the FortiGate itself.
Answer: BC
NEW QUESTION 82
Virtual Domains (VDOMs) allow a FortiGate administrator to do what?
A. Group two or more FortiGate units to form a single virtual device.
B. Split a physical FortiGate unit into multiple virtual devices.
C. Create multiple VLANs in a single physical interface.
D. Group multiple physical interfaces to form a single virtual interface.
Answer: B
NEW QUESTION 83
A static route is configured for a FortiGate unit from the CLI using the following commands:
config router static
edit 1
set device “wan1”
set distance 20
set gateway 192.168.100.1
next
end
Which of the following conditions is NOT required for this static default route to be displayed in the FortiGate unit’s routing table?
A. The Administrative Status of the wan1 interface is displayed as Up.
B. The Link Status of the wan1 interface is displayed as Up.
C. All other default routes should have an equal or higher distance.
D. You must disable DHCP client on that interface.
Answer: D
NEW QUESTION 84
A customer wants to install a FortiSandbox device to identify suspicious files received by an e-mail server. All the incoming e-mail traffic to the e-mail server uses the SMTPS protocol. Which three solutions would be implemented? (Choose three.)
A. FortiGate device in transparent mode sending the suspicious files to the FortiSandbox.
B. FortiSandbox in sniffer input mode.
C. FortiMail device in gateway mode using the built-in MTA and sending the suspicious files to the FortiSandbox.
D. FortiMail device in transparent mode acting as an SMTP proxy sending the suspicious files to the FortiSandbox.
E. FortiGate device in NAT mode sending the suspicious files to the FortiSandbox.
Answer: BCE
NEW QUESTION 85
Which statements are correct properties of a partial mesh VPN deployment? (Choose two.)
A. VPN tunnels interconnect between every single location.
B. VPN tunnels are not configured between every single location.
C. Some locations are reached via a hub location.
D. There are no hub locations in a partial mesh.
Answer: BD
Explanation:
https://docs.fortinet.com/uploaded/files/1086/fortigate-ipsec-vpn-50.pdf (page 64)
NEW QUESTION 86
Which statements are correct regarding an IPv6 over IPv4 IPsec configuration? (Choose two.)
A. The source quick mode selector must be an IPv4 address.
B. The destination quick mode selector must be an IPv6 address.
C. The Local Gateway IP must be an IPv4 address.
D. The remote gateway IP must be an IPv6 address.
Answer: BC
NEW QUESTION 87
You want to manage a FortiGate with the FortiCloud service. The FortiGate shows up in your list of devices on the FortiCloud Web site, but all management functions are either missing or grayed out. Which statement is correct in this scenario?
A. The management tunnel mode on the managed FortiGate must be changed to normal.
B. The managed FortiGate is running a version of FortiOS that is either too new or too old for FortiCloud.
C. The managed FortiGate requires that a FortiCloud management license be purchased and applied.
D. You must manually configure system central-management on the FortiGate CLI and set the management type to fortiguard.
Answer: D
NEW QUESTION 88
You are asked to add a FortiDDoS to the network to combat detected slow connection attacks such as Slowloris. Which prevention mode on FortiDDoS will protect you against this specific type of attack?
A. asymmetric mode
B. aggressive aging mode
C. rate limiting mode
D. blocking mode
Answer: B
NEW QUESTION 89
You are building a FortiGate cluster which is stretched over two locations. The HA connections for the cluster are terminated on the local switches in the data centers. Once the FortiGate devices have booted, they do not form a cluster. The network operators inform you that CRC errors are present on the switches where the FortiGate devices are connected. What should you do to solve this problem?
A. Set the speed/duplex setting to 1 Gbps/Full Duplex.
B. Replace the cables where the CRC errors occur.
C. Place the HA interfaces in dedicated VLANs.
D. Change the ethertype for the HA packets.
Answer: D
NEW QUESTION 90
You want to access the JSON API on FortiManager to retrieve information on an object. In this scenario, which two methods will satisfy the requirement? (Choose two.)
A. Download the WSDL file from FortiManager administration GUI.
B. Make a call with the curl utility on your workstation.
C. Make a call with the SoapUI API tool on your workstation.
D. Make a call with the Web browser on your workstation.
Answer: AC
NEW QUESTION 91
A customer wants to enable SYN flood mitigation in a FortiDDoS device. The FortiDDoS must reply with one SYN/ACK packet per SYN packet from a new source IP address. Which SYN flood mitigation mode must the customer use?
A. SYN retransmission.
B. SYN/ACK cookie.
C. SYN cookie.
D. ACK cookie.
Answer: C
NEW QUESTION 92
An organization has one central site and three remote sites. A FortiSIEM has been installed on the central site and now all devices across the remote sites must be centrally monitored by the FortiSIEM at the central site. Which action will reduce the WAN usage by the monitoring system?
A. Enable SD-WAN FEC (Forward Error Correction) on the FortiGate at the remote site.
B. Install both Supervisor and Collector on each remote site.
C. Install local Collectors on each remote site.
D. Disable real-time log upload on the remote sites.
Answer: C
NEW QUESTION 93
A customer is looking for a way to remove javascripts, macros and hyperlinks from documents traversing the network without affecting the integrity of the content. You propose to use the Content disarm and reconstruction (CDR) feature of the FortiGate. Which two considerations are valid to implement CDR in this scenario? (Choose two.)
A. The inspection mode of the FortiGate is not relevant for CDR to operate.
B. CDR is supported on HTTPS, SMTPS, and IMAPS if deep inspection is enabled.
C. CDR can only be performed on Microsoft Office Document and PDF files.
D. Files processed by CDR can have the original copy quarantined on the FortiGate.
Answer: CD
NEW QUESTION 94
You have deployed a FortiGate in NAT/Route mode as a Secure Web Gateway with a few IP-based authentication firewall policies. Your customer reports that some users now have different browsing permissions from what is expected. All these users are browsing using Internet Explorer through a Remote Desktop Connection to a Terminal Server. When you look at the FortiGate logs, the username for the Terminal Server IP is not consistent. Which action will correct this problem?
A. Change the FSSO Polling mode to Windows NetAPI.
B. Configure FSSO Advanced with LDAP integration.
C. Install the TS/Citrix agent on the terminal server.
D. Make sure the Terminal Server is using the correct DNS server.
Answer: C
NEW QUESTION 95
A customer is experiencing problems with a legacy L3/L4 firewall device and the IPv6 SIP VoIP traffic. Their device is dropping SIP packets, consequently, it cannot process SIP voice calls. Which solution will solve the customer’s problem?
A. Replace their legacy device with a FortiGate and deploy a FortiVoice to extract information from the body of the IPv6 SIP packet.
B. Deploy a FortiVoice and enable IPv6 SIP.
C. Deploy a FortiVoice and enable an IPv6 SIP session helper.
D. Replace their legacy device with a FortiGate and configure it to extract information from the body of the IPv6 SIP packet.
Answer: A
NEW QUESTION 96
A customer has a SCADA environmental control device that is triggering a false-positive IPS alert whenever the Web GUI of the device is accessed. You cannot create a functional custom IPS filter to exempt this behavior, and it appears that the device is so old that it does not have HTTPS support. You need to prevent the false positive IPS alerts from occurring. In this scenario, which two actions will accomplish this task? (Choose two.)
A. Create a URL filter with the Exempt action for that device IP address.
B. Change the relevant firewall policies to use SSL certificate-inspection instead of SSL deep-inspection.
C. Create a very specific firewall policy for that device IP address which does not perform IPS scanning.
D. Reconfigure the FortiGate to operate in proxy-based inspection mode instead of flow-based.
Answer: AC
NEW QUESTION 97
A customer wants to use a central RADIUS server for management authentication when connecting to the FortiGate GUI and to provide different levels of access for different types of employees. Which three actions are required to provide the requested functionality? (Choose three.)
A. Create a wildcard administrator on the FortiGate.
B. Enable radius-vdom-override in the CLI.
C. Create multiple administrator profiles with matching RADIUS VSAs.
D. Enable accprofile-override in the CLI.
E. Set the RADIUS authentication type to MS-CHAPv2.
Answer: ACD
NEW QUESTION 98
A company has just deployed a new FortiMail in gateway mode. The administrator is asked to strengthen e-mail protection by applying the policies shown below:
– E-mails can only be accepted if a valid e-mail account exists.
– Only authenticated users can send e-mails out.
Which two actions will satisfy the requirements? (Choose two.)
A. Configure recipient address verification.
B. Configure inbound recipient policies.
C. Configure outbound recipient policies.
D. Configure access control rules.
Answer: AD
NEW QUESTION 99
You must create a High Availability deployment with two FortiWebs in Amazon Web Services (AWS); each on different Availability Zones (AZ) from the same region. At the same time, each FortiWeb should be able to deliver content from the Web servers of both of the AZs. Which deployment would fulfill this requirement?
A. Configure the FortiWebs in Active-Active HA mode and use AWS Elastic Load Balancer (ELB) for the internal Web servers.
B. Use AWS Elastic Load Balancer (ELB) for both the FortiWebs in standalone mode and the internal Web servers in an ELB sandwich.
C. Configure the FortiWebs in Active-Active HA mode and use AWS Route 53 to load balance the internal Web servers.
D. Use AWS Route 53 to load balance the FortiWebs in standalone mode and use AWS Virtual Private Cloud (VPC) Peering to load balance the internal Web servers.
Answer: B
NEW QUESTION 100
A FortiGate is used as a VPN hub for a number of remote spoke VPN units (Group A) spokes using a phase 1 main mode dial-up tunnel and pre-shared keys. You are asked to establish VPN connectivity for a newly acquired organization’s sites for which new devices will be provisioned Group B spokes. Both existing Group A and new Group B spoke units are dynamically addressed through a single public IP Address on the hub. You are asked to ensure that spokes from Group B have different access permissions than the existing VPN spokes units Group A. Which two solutions meet the requirements for the new spoke group? (Choose two.)
A. Implement a new phase 1 dial-up main mode tunnel with a different pre-shared key than the Group A spokes.
B. Implement a new phase 1 dial-up main mode tunnel with certificate authentication.
C. Implement a new phase 1 dial-up main mode tunnel with pre-shared keys and XAuth.
D. Implement separate phase 1 dial-up aggressive mode tunnels with a distinct peer ID.
Answer: CD
NEW QUESTION 101
A company has just rolled out new remote sites and now you need to deploy a single firewall policy to all of these sites to allow Internet access using FortiManager. For this particular firewall policy, the source address object is called LAN, but its value will change according to the site the policy is being installed. Which statement about creating the object LAN is correct?
A. Create a new object called LAN and enable per-device mapping.
B. Create a new object called LAN and promote it to the global database.
C. Create a new object called LAN and use it as a variable on a TCL script.
D. Create a new object called LAN and set meta-fields per remote site.
Answer: A
NEW QUESTION 102
A legacy router has been replaced by a FortiGate device. The FortiGate has inherited the management IP address of the router and now the network administrator needs to remove the router from the FortiSIEM configuration. Which two statements about this operation are true? (Choose two.)
A. FortiSIEM will move the router device into the Decommission folder.
B. The router will be completely deleted from the FortiSIEM database.
C. By default, FortiSIEM can only parser event logs for FortiGate devices.
D. FortiSIEM will discover a new device for the FortiGate with the same IP.
Answer: AD
NEW QUESTION 103
……
Learning the PassLeader NSE8_812 dumps with VCE and PDF for 100% passing Fortinet certification — https://www.passleader.com/nse8-812.html (109 Q&As Dumps –> 198 Q&As Dumps)
BONUS!!! Download part of PassLeader NSE8_812 dumps for free — https://drive.google.com/drive/folders/1cDWnIf_DJEFgVEbiodH_-L_uXDSQ73sa