PassLeader just published the NEWEST Fortinet FCP_FAZ_AD-7.4 exam dumps! And, PassLeader offer two types of the FCP_FAZ_AD-7.4 dumps — FCP_FAZ_AD-7.4 VCE dumps and FCP_FAZ_AD-7.4 PDF dumps, both VCE and PDF contain the NEWEST FCP_FAZ_AD-7.4 exam questions, they will help you PASSING the Fortinet FCP_FAZ_AD-7.4 exam easily! Now, get the NEWEST FCP_FAZ_AD-7.4 dumps in VCE and PDF from PassLeader — https://www.passleader.com/fcp-faz-ad-7-4.html (42 Q&As Dumps –> 111 Q&As Dumps –> 178 Q&As Dumps)
What’s more, part of that PassLeader FCP_FAZ_AD-7.4 dumps now are free — https://drive.google.com/drive/folders/1Mcadk3PGULKtsjV7mpWbm90Zc–o7ksD
NEW QUESTION 1
What does the disk status Degraded mean for RAID management?
A. The hard drive is no longer being used by the RAID controller.
B. One or more drives are missing from the FortiAnalyzer unit.
C. The device is writing data to the disk to restore the volume to an optimal state.
D. FortiAnalyzer determined that the parity data in the disk is not valid.
Answer: B
Explanation:
When the RAID status is Degraded, it typically indicates that one or more drives in the RAID array have failed or are missing, causing the RAID array to operate with reduced redundancy. In this state, the array is still functioning, but it’s at risk because the fault tolerance provided by RAID is compromised.
NEW QUESTION 2
You are trying to initiate an authorization request from FortiGate to FortiAnalyzer, but the Security Fabric window does not open when you click Authorize. Which two reasons can cause this to happen? (Choose two.)
A. A pre-shared key needs to be established on both sides.
B. The management computer does not have connectivity to the authorization IP address and port combination.
C. The Security Fabric root is unauthorized and needs to be added as a trusted host.
D. The fabric authorization settings on FortiAnalyzer are misconfigured.
Answer: BD
Explanation:
The management computer does not have connectivity to the authorization IP address and port combination. If there is no network connectivity between the management computer and the FortiAnalyzer on the specific IP address and port used for authorization, the Security Fabric window will not open. The fabric authorization settings on FortiAnalyzer are misconfigured. If the fabric authorization settings on FortiAnalyzer are not properly configured, FortiGate will not be able to initiate the authorization request, preventing the Security Fabric window from opening.
NEW QUESTION 3
What is the purpose of the FortiAnalyzer command diagnose system print netstat?
A. It provides network statistics for active connections, including the protocols, IP addresses, and connection states.
B. It provides the complete routing table, including directly connected routes.
C. It provides the static DNS table, including the host names and their expiration timers.
D. It provides NTP server information, including server IPs. stratum, poll time, and latency.
Answer: A
Explanation:
The diagnose system print netstat command in FortiAnalyzer provides detailed information on active network connections, similar to the netstat command found in many operating systems.
NEW QUESTION 4
The connection status of a new device on FortiAnalyzer is listed as Unauthorized. What does that status mean?
A. It is a device whose registration has not yet been accepted in FortiAnalvzer.
B. It is a device that has not yet been assigned an ADOM.
C. It is a device that is waiting for you to configure a pre-shared key.
D. It is a device that FortiAnalvzer does not support.
Answer: A
Explanation:
The “Unauthorized” status indicates that the device has been discovered or attempted to connect but has not yet been authorized for management by FortiAnalyzer. It requires an administrator to approve or authorize the device before it can be fully managed.
NEW QUESTION 5
Which two elements are contained in a system backup created on FortiAnalyzer? (Choose two.)
A. Logs from registered devices.
B. Database snapshot.
C. Report information.
D. System information.
Answer: CD
Explanation:
A FortiAnalyzer system backup includes configurations, report settings, and system information, but it does not include logs from registered devices or database snapshots. Logs are stored separately and are not part of the system configuration backup.
NEW QUESTION 6
Which three RAID configurations provide fault tolerance on FortiAnalyzer? (Choose three.)
A. RAID 0
B. RAID 5
C. RAID 1
D. RAID 6+0
E. RAID 0+0
Answer: BCD
Explanation:
RAID 1 provides fault tolerance through disk mirroring. RAID 5 provides fault tolerance by using distributed parity across multiple disks. RAID 6+0 combines striping with double parity, offering enhanced fault tolerance. RAID 0 and RAID 0+0 do not provide any fault tolerance, as they focus on performance through data striping but offer no redundancy.
NEW QUESTION 7
An administrator, fortinet, can view logs and perform device management tasks, such as adding and removing registered devices. However, administrator fortinet is not able to create a mail server that can be used to send alert emails. What can be the problem?
A. ADOM mode is configured with Advanced mode.
B. A trusted host is configured.
C. fortinet is assigned the default Standard_User administrative profile.
D. fortinet is assigned the default Restricted_User administrative profile.
Answer: C
Explanation:
The Standard_User profile allows viewing logs and performing some device management tasks but typically does not allow configuring global settings like creating a mail server for alert emails. To create a mail server, the administrator would need to have a profile with higher privileges, such as Super_User or a custom profile with the necessary permissions.
NEW QUESTION 8
Which two settings must you configure on FortiAnalyzer to allow non-local administrators to authenticate on FortiAnalyzer with any user account in a single LDAP group? (Choose two.)
A. A local wildcard administrator account.
B. An administrator group.
C. One or more remote LDAP servers.
D. LDAP servers IP addresses added as trusted hosts.
Answer: AC
Explanation:
A wildcard administrator account allows any user from the specified LDAP group to authenticate, and the remote LDAP servers must be configured to validate those user credentials. The combination of these settings enables authentication via LDAP for non-local users.
NEW QUESTION 9
For which two SAML roles can the FortiAnalyzer be configured? (Choose two.)
A. Principal.
B. Service provider.
C. Identity collector.
D. Identity provider.
Answer: BD
Explanation:
In FortiAnalyzer, SAML can be enabled across all Security Fabric devices, enabling smooth movement between devices for the administrator by means of single sign-on (SSO). FortiAnalyzer can play the role of the identity provider (IdP), the service provider (SP), or Fabric SP, when an external identity provider is available.
NEW QUESTION 10
Which two statements are true regarding log fetching on FortiAnalyzer? (Choose two.)
A. A FortiAnalyzer device can perform either the fetch server or client role, and it can perform two roles at the same time with the same FortiAnalyzer devices at the other end.
B. Log fetching can be done only on two FortiAnalyzer devices that are running the same firmware version.
C. Log fetching allows the administrator to fetch analytics logs from another FortiAnalyzer for redundancy.
D. Log fetching allows the administrator to run queries and reports against historical data by retrieving archived logs from one FortiAnalyzer device and sending them to another FortiAnalyzer device.
Answer: BD
Explanation:
Using FortiAnalyzer, you can enable log fetching. This allows FortiAnalyzer to fetch the archived logs of specified devices from another FortiAnalyzer, which you can then run queries or reports on for forensic analysis. The FortiAnalyzer device that fetches logs operates as the fetch client, and the other FortiAnalyzer device that sends logs operates as the fetch server. Log fetching can happen only between two FortiAnalyzer devices, and both of them must be running the same firmware version. A FortiAnalyzer device can perform either the fetch server or client role, and it can perform two roles at the same time with different FortiAnalyzer devices at the other end.
NEW QUESTION 11
Which two statements are true regarding FortiAnalyzer log forwarding? (Choose two.)
A. In aggregation mode, you can forward logs to syslog and CEF servers as well.
B. Forwarding mode forwards logs in real time only to other FortiAnalyzer devices.
C. Aggregation mode stores logs and content files and uploads them to another FortiAnalyzer device at a scheduled time.
D. Both modes, forwarding and aggregation, support encryption of logs between devices.
Answer: CD
Explanation:
– Aggregation mode is only supported between two FortiAnalyer devices, so A is wrong.
– Forwarding is always in real time and does not ONLY forward to other FortiAnalyzer devices. It also forwards to Syslog/CEF. B is wrong.
NEW QUESTION 12
A rogue administrator was accessing FortiAnalyzer without permission, and you are tasked to see what activity was performed by that rogue administrator on FortiAnalyzer. What can you do on FortiAnalyzer to accomplish this?
A. Click FortiView and generate a report for that administrator.
B. Click Task Monitor and view the tasks performed by that administrator.
C. Click Log View and generate a report for that administrator.
D. View the tasks performed by the rogue administrator in Fabric View.
Answer: B
Explanation:
View the tasks FortiAnalyzer administrators have performed, including progress and status.
NEW QUESTION 13
An administrator has moved FortiGate A from the root ADOM to ADOM1. Which two statements are true regarding logs? (Choose two.)
A. Analytics logs will be moved to ADOM1 from the root ADOM automatically.
B. Archived logs will be moved to ADOM1 from the root ADOM automatically.
C. Logs will be presented in both ADOMs immediately after the move.
D. Analytics logs will be moved to ADOM1 from the root ADOM after you rebuild the ADOM1 SQL database.
Answer: BD
Explanation:
When you move a device, only the archive (compressed) logs are migrated to the new ADOM. The analytics (indexed) logs stay in the old ADOM until you rebuild the database.
NEW QUESTION 14
In Log View, you can use the Chart Builder feature to build a dataset and chart based on the filtered search results. Similarly, which feature you can use for FortiView?
A. Export to Report Chart
B. Export to Chart Library
C. Export to Chart Builder
D. Export to Custom Chart
Answer: A
Explanation:
Similar to the Chart Builder feature in Log View, you can export a chart from a FortiView. The chart export includes any filters you set on the FortiView.
NEW QUESTION 15
Which two FortiAnalyzer features allow you to automatically build a dataset and chart based on a filtered search result? (Choose two.)
A. Export to Report Chart (FortiView)
B. Custom View
C. Dataset Library
D. Chart Builder
Answer: AD
NEW QUESTION 16
……
Learning the PassLeader FCP_FAZ_AD-7.4 dumps with VCE and PDF for 100% passing Fortinet certification — https://www.passleader.com/fcp-faz-ad-7-4.html (42 Q&As Dumps –> 111 Q&As Dumps –> 178 Q&As Dumps)
BONUS!!! Download part of PassLeader FCP_FAZ_AD-7.4 dumps for free — https://drive.google.com/drive/folders/1Mcadk3PGULKtsjV7mpWbm90Zc–o7ksD